ABSTRACT Introduction: Superposing 3D models is an imminent need. However, current methods rely on marking multiple points on the maxilla and mandible, which could increase point marking and overlapping errors. Objective: This study aimed at developing a method for superimposing 3D models of the maxillary and mandibular arches with Autodesk Inventor® engineering software, using a single universal coordinate system (UCS) point superposition. Methods: A total of 104 STL (stereolithography) models of the maxillary and mandibular arches exported from My iTero® platform were retrospectively selected, in which T0 and T1 were the initial and refinement periods, respectively (n=26 per group). The X, Y, and Z coordinates associated with a single point in each arch were inserted into the models with SlicerCMF® software for model orientation. The arch models with UCS registration were transferred to Autodesk Inventor® for superimposition and to measure tooth movements performed during Invisalign® treatment. Arch expansion, intrusion and rotation were analyzed by two examiners. The statistics were performed using intraclass correlation coefficients (ICC), Dahlberg’s formula, and t-test (p<0.05). Results: A reliable method of superimposing 3D digital models using a single UCS point in the maxilla and mandible was developed. ICC showed excellent intra- and inter-examiner correlation (ICC>0.90). A systematic error was not found concerning linear and angular measurements (<1mm and <1.5°, respectively). Digital dental movements could be analyzed, including arch expansion, dental intrusion, and tooth rotation. Conclusions: The developed method was proven reliable and reproducible for superimposing 3D models of the maxillary and mandibular arches by using UCS system.

RESUMO Introdução: A sobreposição de modelos 3D é uma necessidade iminente. No entanto, os métodos atuais dependem da marcação de múltiplos pontos na maxila e na mandíbula, o que pode aumentar a incorporação de erros no processo de sobreposição. Objetivo: O objetivo desse estudo foi desenvolver um método para sobrepor modelos 3D das arcadas superior e inferior utilizando o software de engenharia Autodesk Inventor®, por meio da marcação de um único ponto em cada arcada, usando o sistema de coordenadas universal (UCS). Métodos: No total, 104 modelos STL das arcadas superior e inferior exportados da plataforma My iTero® foram selecionados retrospectivamente, onde T0 foi o período inicial e T1, o de refinamento (n=26 por grupo). As coordenadas X, Y e Z associadas a um único ponto em cada arcada foram inseridas nos modelos usando o software SlicerCMF®. Os modelos com os pontos UCS demarcados foram transferidos para o software Autodesk Inventor® para realizar a sobreposição e medir os movimentos dentários realizados durante o tratamento com Invisalign®. Os movimentos de expansão, intrusão e rotação foram analisados por dois examinadores. A análise estatística foi realizada usando os coeficientes de correlação intra-classe (ICC), fórmula de Dahlberg e teste t (p<0,05). Resultados: Foi desenvolvido um método confiável de sobreposição de modelos digitais 3D usando um único ponto UCS na maxila e mandíbula. O ICC apresentou excelente correlação intra e inter-avaliadores (ICC>0,90). Não foi encontrado erro sistemático nas medidas lineares e angulares (<1mm e <1,5°, respectivamente). Os movimentos dentários puderam ser analisados por meio do método proposto, incluindo expansão da arcada, intrusão e rotação dentária. Conclusão: O método desenvolvido provou ser confiável e reprodutível para sobreposição de modelos 3D das arcadas superior e inferior usando o sistema UCS com marcação de ponto único.

Aim To evaluate the prevalence of untreated caries and its association with biological, individual, and environmental variables in independently-living elderly people. Methods This cross-sectional study included 72 elderly (≥60 years) patients of a university dental clinic in Belo Horizonte, Brazil. Sociodemographic data, systemic diseases, medications, and free sugar intake were collected. Visible plaque, Decayed, Missing, and Filled Teeth (DMFT), and Decayed and Filled Root (DFR) indexes were assessed through clinical examination. Unstimulated saliva was collected to determine salivary flow, pH, and buffering capacity. Descriptive analysis and multilevel logistic regression analysis were performed following a dental caries theoretical model ( p <0.05, 95% CI). Results The mean DMFT and DFR were 24.44 (SD=4.59) and 3.21 (SD=2.93), respectively. The prevalence of untreated caries was 61.11%. In the adjusted multilevel regression model involving 1639 teeth, untreated dental caries was significantly associated with the presence of biofilm (OR = 1.84; 95% CI: 1.24–2.74), salivary buffering capacity (OR = 0.87; 95% CI: 0.77–0.99) and per capita income (OR = 0.06; 95% CI: 0.004–0.74). Conclusion The experience of dental caries was widespread among independently-living elderly patients, and its variability was best explained by the presence of biofilm, reduced salivary buffering capacity, and low per capita income. A comprehensive assessment is needed of the biological, individual, and environmental factors related to the presence of dental caries in independently-living elderly people.

Aim Although bulk fill composites have been widely used as restorative material, there is no consensus regarding the best clinical protocol in terms of composite technique and adhesive system. Therefore, this clinical trial evaluated the clinical performance of bulk fill composites for class I restorations under different protocols. Methods A randomized clinical trial including 155 class I restorations was conducted using different adhesive systems: conventional technique (phosphoric acid + conventional three-step adhesive system) (Group 1, 2 and 3); or self-etching adhesive system (Groups 4, 5 and 6). Control groups 1 and 4 were restored with conventional composite; groups 2 and 5 with low viscosity bulk fill and conventional composite as occlusal coverage; groups 3 and 6 with high viscosity bulk fill. The FDI criteria was used for clinical evaluation at baseline and after 6 months. Results All groups showed good clinical performance. At baseline, the adhesive system did not affect postoperative hypersensitivity. After 6 months, group 5 showed a significant reduction in color and translucency; group 6 a reduction in terms of anatomical form and for postoperative sensitivity and an improvement in patient satisfaction (p<0.05). Considering the same restorative technique, the use of the self-etching adhesive system showed a significant decrease in color and translucency (p<0.05). Conclusion All groups showed favorable clinical performance, and promising results were found for the conventional adhesive system and high viscosity bulk fill protocol.

Abstract Objective: To evaluate the efficacy of desensitizing agents for the obliteration of dentinal tubules subjected or not to a simulated oral environment. Material and Methods: Dentinal discs (n=8) treated with Riva-Star (RS) or PRG-Barrier-Coat (PRG) were submitted (cycled) or not submitted (control) to erosive-abrasive-thermal cycles and evaluated using scanning electron microscopy/energy dispersive spectroscopic analysis. The variables analyzed were tubule obliteration and dentin surface chemical composition. Data were analyzed by non-parametric tests (p<0.05). Results: The cycled and control groups did not differ significantly for the responses in each material. The PRG control and cycled groups had fewer visible tubules and a higher proportion of totally obliterated tubules than the RS groups. The percentages of silver coverage were higher in the RS-control than in the RS-cycled. There was a significant inverse correlation between the presence of silver and non-obliterated tubules (R=-0.791; p<0.001). The percentages of carbon, aluminum, strontium, and potassium were significantly higher in the PRG-control and PRG-cycled compared to the RS control. The percentages of calcium, phosphorus, and silver were significantly higher in the RS compared to the PRG groups. PRG-control showed a higher percentage of boron than RS-control. Conclusion: PRG promoted greater tubule obliteration than SR. Simulated stress did not affect the obliterating effect of each agent. Greater silver coverage corresponded to a lower proportion of non-obliterated tubules in RS. Carbon, aluminum, strontium, boron, and potassium predominated in the dentin surface treated with PRG, while calcium, phosphorus, and silver prevailed in RS groups.

Abstract: This in vitro study aimed to assess the effects of different pretreatments used to adapt glass-fiber posts cemented to root canals with different resin cements, regarding porosity percentage and bond strength. Twelve bovine incisor roots were prepared with Largo drills. After post space preparation, the specimens were randomized into two types of pretreatment groups (n = 3): water-wet bonding and ethanol-wet bonding. After the post were cemented, the roots were stored in 100% humidity at room temperature for 7 days. The samples were scanned by microcomputed tomography (micro-CT). Images were reconstructed by NRecon software, and CTAn software was used to analyze the porosity percentage (%) at the luting interface. Evaluation of the push-out bond strength was performed by serially cutting the roots, and submitting the slices to testing. Additionally, the resin cement post-gel shrinkage values (%) were measured using the strain-gauge method (n = 10). Data were analyzed by two-way ANOVA, Tukey's test and Student's t test (a = 0.05). The roots prepared with ethanol-wet bonding using RelyX™ U200 had significantly lower porosity in the coronal and apical thirds (p < 0.05). The group prepared with ethanol-wet bonding using RelyX™ ARC presented better bond strength results in the coronal and apical thirds (p < 0.05). RelyX™ ARC (0.97%) produced a higher post-gel shrinkage value than RelyX™ U200 (0.77%). Canals pretreated with ethanol-wet bonding presented better outcomes in regard to porosity percentage and push-out bond strength.

The goal of this study is to test photoelastic resins for manufacturing models with teeth and/or implants under chewing load. Four commercial brands have been chosen: Araldite (Ciba Chemicals), Flexible GIV-Rigid GIV (Polipox) and PL2 (Measurements Group). Nine discs were manufactured, four of them from each of the photoelastic resin brands and five from different proportions of mixture between Flexible GIV and Rigid GIV. All the models were subjected to the diametral compression test, and observed in a circular polariscope. The first order fringe has always been adopted as a benchmark to calculate the photoelastic constant. To the load of interest (150 Newtons), Flexible GIV resin showed areas that followed the elastic regime. Residual stresses for the resin PL2 and persistence of bubbles within the model were observed. Rigid GIV Resin generated the first fringe order only at 280 Newtons load. Araldite resin behaved within the elastic regime and there were no areas with excessive concentration of fringes. The models generated from the manual mixing generated non-homogeneous photoelastic images. The Araldite resin showed to be the most suitable material for manufacturing birefringent models with teeth and/or implants under chewing load.

Resumo Introdução Restaurações estéticas indiretas são preferencialmente cimentadas utilizando-se cimentos resinosos convencionais e sistema adesivo de condicionamento total ou cimentos resinosos autoadesivos. Estes últimos são tecnicamente menos sensíveis e aderem aos tecidos dentários sem tratamento prévio ou aplicação de adesivo, com um único passo para sua aplicação aos tecidos dentários. Objetivo Comparar qualitativamente as interfaces adesivas de dois cimentos resinosos autoadesivos e um cimento resinoso convencional, sob microscopia eletrônica de varredura. Material e método 42 coroas de incisivos bovinos foram seccionadas e as faces vestibulares planificadas expondo esmalte (E) ou dentina (D). Os subgrupos foram definidos de acordo com o tipo e tempo de condicionamento: E1-sem tratamento, E2-37% de ácido fosfórico por 15 segundos, E3-37% de ácido fosfórico por 30 segundos; D1-sem tratamento, D2-37% de ácido fosfórico durante 5 segundos; D3-11,5% de ácido poliacrílico durante 15 segundos. Um bloco de resina foi unido a cada substrato usando os cimentos resinosos autoadesivos RelyX U100 e RelyX U200 (3M ESPE) (n=3). Como referência de camada híbrida, foram cimentados seis blocos de resina com RelyX ARC e o sistema adesivo Scotchbond Multi-Purpose(esmalte-EA, dentina-DA). Após armazenamento (7 dias, umidade, 37±1°C), as amostras foram preparadas para análise microscópica. Resultado Nos espécimes ARC, houve formação de camada híbrida em EA e DA. U100 E1 mostrou lacunas na interface adesiva, enquanto E2 e E3 apresentaram boa interação para ambos os cimentos autoadesivos. Houve interação superficial com U100 e U200 em D1, enquanto em D2 e D3, foram observadas tags de resina apenas para U100. Conclusão Concluiu-se que o condicionamento do substrato pode aumentar a interação entre cimentos resinosos autoadesivos e os tecidos dentários, embora este não seja o caso do RelyX U200 e da dentina.

Abstract Introduction Convencional resin cements can be used in combination with a total-etch system in a conventional mode or as self-adhesive resin cements. The latter are less technique sensitive and able to bond to dental tissues without previous treatment or adhesive layer and requires only a single step to be applied to dental structures. Objective To compare qualitatively the adhesive interfaces of two self-adhesive resin cements and one conventional resin cement after different tooth surface treatments under scanning electron microscopy. Material and method 42 crowns of bovine incisors were sectioned and flattened exposing enamel (E) or dentine (D) substrate. Subgroups were defined according to conditioning type and time: E1—no treatment, E2—37% phosphoric acid for 15 seconds, E3—37% phosphoric acid for 30 seconds; D1—no treatment, D2—37% phosphoric acid for 5 seconds; D3—11.5% polyacrylic acid for 15 seconds. A resin block was bonded to each substrate using the self-adhesive resin cements RelyX U100 (3M ESPE) and RelyX U200 (3M ESPE). As a reference hybrid layer, six resin blocks were luted with RelyX ARC and Scotchbond Multi-Purpose adhesive system (3M ESPE) (enamel—EA; dentine—DA). After aging for 7 days in a moist environment at 37±1°C, samples were prepared for microscopy analysis. Result and Discussion In the ARC specimens, there was hybrid layer formation in both EA and DA. U100 E1 showed gaps at the adhesive interface, while E2 and E3 showed interaction for both self-adhesive cements. There was superficial interaction with bothU100 and U200 in D1, while in D2 and D3, resin tags were only observed in the case of U100. Conclusion It was concluded that substrate conditioning may enhance the interaction between self-adhesive resin cements and dental tissues, although this is not the case for RelyX U200 and dentine.

Resumo Avaliou-se o efeito da espessura, cor e translucidez de uma cerâmica vítrea a base de dissilicato de lítio para CAD / CAM sobre a transmissão da luz de unidades de diodos emissores de luz (LED) e de quartzo-tungstênio-halogênio (QTH). Cerâmica IPS e.max CAD nas cores A1, A2, A3, A3.5 de translucidez alta (HT) e baixa (LT) foram cortadas (1, 2, 3, 4, 5 mm). Os espectros de emissão das fontes de luz foram determinados. A intensidade da luz incidente e transmitida através de cada espécime de cerâmica foi medida para determinar a percentagem de transmissão de luz (TP). Um modelo de regressão linear foi utilizado para a análise estatística. Houve interação significativa entre a fonte de luz e translucidez cerâmica (p = 0.008) e forte correlação negativa (r = -0.845, p <0.001) entre a espessura da cerâmica e TP. O aumento da espessura em uma unidade levou a uma redução média de 3.17 em TP. Não houve diferença significativa em TP (p = 0.124) entre as cores A1 (ß1 = 0) e A2 (ß1 = -0.45), mas ocorreu redução significativa para as cores A3 (ß1 = -0.83) e A3.5 (ß1 = -2.18). A interação QTH/HT proporcionou maior TP (ß1 = 0) do que LED/HT (ß1 = -2.92), QTH/LT (ß1 = -3.75) e LED/LT (ß1 = -5.58). A transmissão de luz foi mais eficaz utilizando QTH e cerâmica de alta translucidez, diminuiu à medida que a espessura de cerâmica aumentou, e foi maior para as cores A1 e A2. A partir do modelo de regressão (R2 = 0.85), obteve-se uma equação para estimar o valor de TP utilizando os valores de ß1 encontrado. Foi observada TP máxima de 25% para QTH e 20% para LED, sugerindo que a atenuação promovida pela cerâmica pode comprometer a ativação de um cimento resinoso fotoativado e de ativação dupla.

The effect of thickness, shade and translucency of CAD/CAM lithium disilicate glass-ceramic on light transmission of light-emitting diode (LED) and quartz-tungsten-halogen units (QTH) were evaluated. Ceramic IPS e.max CAD shades A1, A2, A3, A3.5, high (HT) and low (LT) translucency were cut (1, 2, 3, 4 and 5 mm). Light sources emission spectra were determined. Light intensity incident and transmitted through each ceramic sample was measured to determine light transmission percentage (TP). Statistical analysis used a linear regression model. There was significant interaction between light source and ceramic translucency (p=0.008) and strong negative correlation (R=-0.845, p<0.001) between ceramic thickness and TP. Increasing one unit in thickness led to 3.17 reduction in TP. There was no significant difference in TP (p=0.124) between shades A1 (ß1=0) and A2 (ß1=-0.45) but significant reduction occurred for A3 (ß1=-0.83) and A3.5 (ß1=-2.18). The interaction QTH/HT provided higher TP (ß1=0) than LED/HT (ß1=-2.92), QTH/LT (ß1=-3.75) and LED/LT (ß1=-5.58). Light transmission was more effective using halogen source and high-translucency ceramics, decreased as the ceramic thickness increased and was higher for the lighter shades, A1 and A2. From the regression model (R2=0.85), an equation was obtained to estimate TP value using each variable ß1 found. A maximum TP of 25% for QTH and 20% for LED was found, suggesting that ceramic light attenuation could compromise light cured and dual cure resin cements polymerization.

Introdução: pacientes com aparelhos ortodônticos fixos sofrem limitações no controle efetivo de biofilme por métodos mecânicos, trazendo a necessidade de um coadjuvante no controle na inflamação e melhora na saúde bucal.Objetivo:esse estudo cruzado prospectivo randomizado teve como objetivo analisar o efeito do verniz de clorexidina (CHX) a 40% no crescimento gengival de pacientes com aparelhos ortodônticos fixos.Métodos:indivíduos adolescentes com aparelhos ortodônticos fixos e aumento de volume gengival foram recrutados para a pesquisa (n = 30). Cada participante atuou como seu próprio controle, tendo, na maxila, um lado controle e um tratamento. No lado controle, aplicou-se verniz placebo e no lado experimental, o verniz EC40(r) Biodentic CHX, ambos na face vestibular das coroas dos pré-molares e primeiro molar superiores. Os vernizes e lados foram escolhidos de forma aleatória e a identificação deles e a que grupo pertenciam foi mantida por um terceiro observador, não sendo revelada aos pesquisadores nem aos participantes até o final do estudo. Fotografias digitais foram tiradas por um fotógrafo treinado, antes da aplicação do verniz no tempo inicial (T0), bem como 14 dias (T14) e 56 dias (T56) após a aplicação. O volume gengival foi calculado indiretamente, por meio das áreas vestibulares (mm2) das coroas dos segundos pré-molares superiores, com o softwareRapidSketch(r), em todos os tempos de estudo. Os dados foram analisados usando ANOVA e teste de Turkey-Krammer.Resultados:na amostra final de 30 indivíduos, observou-se que, em T0, os grupos controle e tratamento foram semelhantes. Já em T14 e T56, foi observada uma progressiva redução na área da coroa clínica no grupo controle, e um aumento na área média do grupo experimental (p< 0,05).Conclusão:o uso do verniz de CHX a 40% diminui o excessivo crescimento gengival em pacientes sob tratamento ortodôntico. Estudos futuros são necessários para se determinar o tempo de ação e a frequência de aplicação.

Introduction: Fixed orthodontic appliances patients suffer limitations on the effective control of biofilm by mechanical methods, bringing the need of a coadjutant in the control of inflammation and oral health improvement.Objective: The aim of this prospective split-mouth blind study was to analyze the effect of a 40% chlorhexidine (CHX) varnish on gingival growth of patients with orthodontic fixed appliances. Methods: Healthy teenage patients with fixed orthodontic appliances and increased gingival volume were recruited (n = 30). Each individual was his own control, having in the maxilla one control side and one treatment side. An application of varnishes occurred on the vestibular area of the upper premolars and first molar crowns, on the control side (placebo varnish) and on the experimental side (EC40(r) Biodentic CHX varnish). The varnishes and sides were randomly chosen and its identification and group was kept by a third party observer and it was not revealed to the researchers and participants until the end of study. In order to establish a baseline registration, digital photographs were taken by a trained photographer before varnish application at baseline (T0), as well as 14 days (T14) and 56 days (T56) after the application. The gingival volume was calculated indirectly using the vestibular areas (mm2) of the upper second premolars' clinical crowns by RapidSketch(r) software, at all study times. The data were analyzed using ANOVA and the Turkey-Krammer test.Results:It was observed, in the final sample of 30 individuals, that at T0, the control and treatment groups were similar. At T14 and T56, a progressive reduction of the clinical crown area was seen in the control group, and an increase in the average area was detected in the experimental group (p < 0,05).Conclusions: The use of 40% CHX varnish decreases the gingival overgrowth in patients undergoing orthodontic treatment. Further studies are necessary to set the action time and frequency of application.

OBJETIVO: Avaliar o índice de sucesso clínico dos implantes pilares de próteses totais implantossuportadas. As próteses implantossuportadas vêm sendo utilizadas como uma alternativa viável ao planejamento de reabilitação oral. O protocolo de dois estágios cirúrgicos, ao passar dos anos, vem sendo cada vez mais substituídos pelos procedimentos de carga imediata, principalmente na região anterior inferior, nos casos de reabilitação de pacientes totalmente desdentados. Tal procedimento torna-se viável devido ao alto índice de sucesso da técnica com resultados bastante satisfatórios. MÉTODOS: Por meio de uma revisão de literatura focada em trabalhos publicados com acompanhamento clínico entre 8 e 15 anos. RESULTADOS: Os implantes instalados em mandíbula apresentaram índices de sucesso maiores que os instalados em maxila. Os casos com acompanhamento mais longos, com 15 anos, apresentaram índices de sucesso maiores do que quando comparados aos acompanhamentos de 8 e 10 anos. CONCLUSÃO: O índice de sucesso dos implantes pilares de prótese total é bastante alto.

OBJECTIVE: The aim of this study was to assess the clinical success rate of implant-supported complete dental prostheses, which are being used as a feasible alternative in planning of oral rehabilitation. Over the years, the two-stage surgical protocol has increasingly been replaced by immediate loading procedures, especially in the mandibular anterior region in cases of rehabilitation of completely edentulous patients. This procedure has become feasible due to the high success rate of the technique with very satisfactory results. METHODS: By means of a literature review focused on published articles with clinical follow-up between 8 and 15 years. RESULTS: Implants placed in the mandible had higher success rates than those inserted in the maxilla. Cases with longer follow-up periods, 15 years, showed higher success rates in comparison with follow-up periods of 8 and 10 years. CONCLUSION: Success rates of implant-supported complete dental prostheses are very high.

OBJECTIVE: The occlusal patterns are key requirements for the clinical success of oral rehabilitation supported by implants. This study compared the stresses generated by the disocclusion in the canine guide occlusion (CGO) and bilateral balanced occlusion (BBO) on the implants and metallic infrastructure of a complete Brånemark protocol-type denture modified with the inclusion of one posterior short implant on each side. MATERIAL AND METHODS: A three-dimensional model simulated a mandible with seven titanium implants as pillars, five of them installed between the mental foramen and the two posterior implants, located at the midpoint of the occlusal surface of the first molar. A load of 15 N with an angle of 45° was applied to a tooth or distributed across three teeth to simulate the CGO or BBO, respectively. The commercial program ABAQUS® was used for the model development, before and after the processing of the data. The results were based on a linear static analysis and were used to compare the magnitude of the equivalent stress for each of the simulations. RESULTS: The results showed that the disocclusion in CGO generated higher stresses concentrated on the working side in the region of the short implant. In BBO, the stresses were less intense and more evenly distributed on the prosthesis. The maximum stress found in the simulation of the disocclusion in CGO was two times higher than that found in the simulation of the BBO. The point of maximum stress was located in the neck of the short implant on the working side. CONCLUSIONS: Under the conditions of this study, it was concluded that the BBO pattern was more suitable than CGO for the lower complete denture supported by implants without free distal ends.

Este estudo avaliou a atuação de cirurgiões-dentistas (CD) nas instituições de longa permanência de Belo Horizonte (MG) e as práticas de higiene bucal adotadas. Questionários semiestruturados foram entregues aos coordenadores das 37 instituições filantrópicas e trinta privadas e coletados após uma semana. Os resultados foram comparados pelos testes Qui-quadrado e Exato de Fisher (p<0,05). Houve retorno de 81% dos questionários. A maioria das instituições privadas (74,2%) e filantrópicas (87%) não possui CD na equipe de saúde (p=0,21). A localização da instituição, o tempo de fundação, o tipo e o número de residentes não interferiram na presença de CD (p>0,05). Nas instituições filantrópicas com consultório, 67% possuíam CD, e nenhum CD trabalhava onde não havia consultório. Mesmo sem consultório, 13% das instituições privadas possuíam CD. 69,6% das filantrópicas encaminhavam o idoso em caso de necessidade para centros de saúde e, nas privadas, 58,1% direcionavam ao familiar (p=0,00). Maior percentual de instituições privadas adotava medidas sistematizadas de higiene bucal (p=0,01), com grande variabilidade nas condutas relatadas. Há necessidade da incorporação do CD na equipe de saúde das instituições e da sistematização das práticas de higiene bucal.

This study evaluated the activities of dentists, dental care and oral hygiene practices in the long-term care institutions of Belo Horizonte (Minas Gerais, Brazil). A semi-structured questionnaire was handed out to the coordinators of 37 philanthropic and 30 private institutions. The data was compared by the chi-square and Fisher's Exact Tests. 81% of the questionnaires were answered. The majority of the private (74.2%) and philanthropic institutions (87%) do not have a dentist (p=0.21). The location, period of existence, type institution kind and number of residents weren't factors regarding the presence of a dentist (p>0.05). 67% of the philanthropic institutions with equipped consultation rooms had dentists, though there were none when there was no consultation room. Even without consultation rooms, 13% of the private institutions had dentists. When necessary, 69.6% of the philanthropic institutions refer the elderly to public health centers, while 58.1% of the private institutions refer them to their family dentists. A higher percentage of the private institutions adopted systematic oral hygiene procedures (p=0.01), with a considerable divergence of treatment reported. There is a need to include a dentist on the health staff in the institutions and for systematization of oral hygiene practices.

Este estudo avaliou a atuação de cirurgiões-dentistas (CD) nas instituições de longa permanência de Belo Horizonte (MG) e as práticas de higiene bucal adotadas. Questionários semiestruturados foram entregues aos coordenadores das 37 instituições filantrópicas e trinta privadas e coletados após uma semana. Os resultados foram comparados pelos testes Qui-quadrado e Exato de Fisher (p<0,05). Houve retorno de 81% dos questionários. A maioria das instituições privadas (74,2%) e filantrópicas (87%) não possui CD na equipe de saúde (p=0,21). A localização da instituição, o tempo de fundação, o tipo e o número de residentes não interferiram na presença de CD (p>0,05). Nas instituições filantrópicas com consultório, 67% possuíam CD, e nenhum CD trabalhava onde não havia consultório. Mesmo sem consultório, 13% das instituições privadas possuíam CD. 69,6% das filantrópicas encaminhavam o idoso em caso de necessidade para centros de saúde e, nas privadas, 58,1% direcionavam ao familiar (p=0,00). Maior percentual de instituições privadas adotava medidas sistematizadas de higiene bucal (p=0,01), com grande variabilidade nas condutas relatadas. Há necessidade da incorporação do CD na equipe de saúde das instituições e da sistematização das práticas de higiene bucal.

This study evaluated the activities of dentists, dental care and oral hygiene practices in the long-term care institutions of Belo Horizonte (Minas Gerais, Brazil). A semi-structured questionnaire was handed out to the coordinators of 37 philanthropic and 30 private institutions. The data was compared by the chi-square and Fisher's Exact Tests. 81% of the questionnaires were answered. The majority of the private (74.2%) and philanthropic institutions (87%) do not have a dentist (p=0.21). The location, period of existence, type institution kind and number of residents weren't factors regarding the presence of a dentist (p>0.05). 67% of the philanthropic institutions with equipped consultation rooms had dentists, though there were none when there was no consultation room. Even without consultation rooms, 13% of the private institutions had dentists. When necessary, 69.6% of the philanthropic institutions refer the elderly to public health centers, while 58.1% of the private institutions refer them to their family dentists. A higher percentage of the private institutions adopted systematic oral hygiene procedures (p=0.01), with a considerable divergence of treatment reported. There is a need to include a dentist on the health staff in the institutions and for systematization of oral hygiene practices.

O objetivo do presente estudo foi validar os índices dental aesthetic index (DAI) e index of complexity, outcome and need (ICON) a partir da opinião de um painel de ortodontistas brasileiros. A comparação desses dois índices de necessidade de tratamento ortodôntico foi feita baseada no consenso de um painel de 20 experientes ortodontistas. Um conjunto de 108 modelos de estudo representando uma grande variedade de tipos de maloclusão foi selecionado. Um examinador calibrado mensurou os modelos para ambos os índices. Os ortodontistas, de forma individual, avaliaram a necessidade de tratamento ortodôntico de cada modelo. O valor médio do painel de ortodontistas em relação à necessidade de tratamento foi utilizado como padrão-ouro para validação dos índices. Os valores de acurácia dos índices, medidos pela curva de característica de operação do receptor, foram altos: DAI = 81,83% (IC95%: 71,21-92,44); ICON = 88,75% (IC95%: 78,57-98,92). Embora a acurácia do ICON tenha sido mais alta do que a do DAI, ambos os índices são recomendados para determinar a necessidade de tratamento ortodôntico no Brasil.

The aim of the present study was to validate the dental aesthetic index (DAI) and index of complexity, outcome and need (ICON) based on the opinions of a panel of Brazilian orthodontists. A comparison of these two orthodontic treatment need indices was carried out based on the consensus of a panel of 20 experienced orthodontists. A set of 108 study casts representing the full spectrum of malocclusions was selected. A calibrated examiner scored the casts for both indices. The orthodontists individually rated the casts regarding the degree of orthodontic treatment need. The panel's mean rating of the need for treatment was used as the gold standard for evaluating the validity of the indices. The accuracy of the indices, as reflected in the area under receiver-operating characteristic curves, was high: DAI = 81.83% (95%CI: 71.21-92.44); ICON = 88.75% (95%CI: 78.57-98.92). Although the accuracy of the ICON was higher than that of the DAI, both indices are recommended for determining orthodontic treatment need in Brazil.

O objetivo do presente estudo foi validar os índices dental aesthetic index (DAI) e index of complexity, outcome and need (ICON) a partir da opinião de um painel de ortodontistas brasileiros. A comparação desses dois índices de necessidade de tratamento ortodôntico foi feita baseada no consenso de um painel de 20 experientes ortodontistas. Um conjunto de 108 modelos de estudo representando uma grande variedade de tipos de maloclusão foi selecionado. Um examinador calibrado mensurou os modelos para ambos os índices. Os ortodontistas, de forma individual, avaliaram a necessidade de tratamento ortodôntico de cada modelo. O valor médio do painel de ortodontistas em relação à necessidade de tratamento foi utilizado como padrão-ouro para validação dos índices. Os valores de acurácia dos índices, medidos pela curva de característica de operação do receptor, foram altos: DAI = 81,83% (IC95%: 71,21-92,44); ICON = 88,75% (IC95%: 78,57-98,92). Embora a acurácia do ICON tenha sido mais alta do que a do DAI, ambos os índices são recomendados para determinar a necessidade de tratamento ortodôntico no Brasil.

The aim of the present study was to validate the dental aesthetic index (DAI) and index of complexity, outcome and need (ICON) based on the opinions of a panel of Brazilian orthodontists. A comparison of these two orthodontic treatment need indices was carried out based on the consensus of a panel of 20 experienced orthodontists. A set of 108 study casts representing the full spectrum of malocclusions was selected. A calibrated examiner scored the casts for both indices. The orthodontists individually rated the casts regarding the degree of orthodontic treatment need. The panel's mean rating of the need for treatment was used as the gold standard for evaluating the validity of the indices. The accuracy of the indices, as reflected in the area under receiver-operating characteristic curves, was high: DAI = 81.83% (95%CI: 71.21-92.44); ICON = 88.75% (95%CI: 78.57-98.92). Although the accuracy of the ICON was higher than that of the DAI, both indices are recommended for determining orthodontic treatment need in Brazil.